ST™ hand-held capping machines tighten screw on caps, lug caps, twist caps, and lids from 10mm – 130mm in diameter onto plastic and glass bottles. All exterior components of the ST™ hand capper are constructed of 316 stainless steel, making the ST™ cap tightener ideal for use in laboratory, pharmaceutical, clean room, sanitary and sterile packaging environments. The 316 stainless steel body also makes the ST™ bottle capper an excellent choice for capping bottles in corrosive environments for bottlers that package brine, acids, and other caustic and corrosive substances. The ST™ pneumatic manual bottle capping machine runs on compressed air at 90 psi.
Other Bottle Cappers You Might Like:
ST™ Manual Capping Machine
Other Bottle Cappers You Might Like:
Key Features
- Tightens Caps from 10mm - 130mm
- Torque Range 0 - 200 inch lbs.
- Push-to-Start
- Hand Capper Automatically Shuts Off the Instant the Cap is Tight
- Outstanding Repeatable Torque Accuracy
- External Torque Adjustment Dial
- 316 Stainless Steel Construction
- 100% Food Grade Lubricants
- Integrated Exhaust Capture System
- Reversible - Can be Used as a De-Capper
- Quick Change Chuck
- Quiet and Comfortable to Use
- Pneumatic Operation
- Air Requirements: 90 PSI @ 4.0CFM
The ST™ Pneumatic Bottle Capper is CE Marked (CE Certified)
Why the ST™ Capping Machine is ideal for use in Clean, Sterile & Harsh Environments
The ST™ manual hand held cap tightener is constructed of 316 stainless steel
316 Stainless steel is the material of choice for pharmaceutical and sterile packaging environments because it is easy to clean, resistant to corrosion, and is chemically resistant to the cleaning agents commonly used in these environments. It provides superior resistance to attack by most chemicals including corrosion caused by chloride, detergents and aggressive cleaning agents.
316 Stainless steel also is the material of choice when capping harsh substances such as brine, and acids. These substances will quickly corrode plastics and metals other than stainless steel.
The Exhaust Capture System™ is integrated into the design
The Exhaust Capture System™ channels the exhaust air generated by the capping motor and directs it into an air hose. The exhaust air then travels through the air hose to where it can be expelled in a location that will not adversely affect the clean environment.
As can be seen in the image to the left, two coil air hoses are attached to the capping machine. One of the coil air hoses is the air supply hose while the other is the exhaust air hose.
Food Grade Lubricants
While the exterior of the ST™ capping machine is free of greases or lubrications, the internal components of the ST™ Manual Bottle Capper Machine are lubricated with NSF-H1 Food Grade Certified lubricants.
Oil Free Pneumatic Motors (optional)
Your ST™ cap tightener can be built with an optional oil free pneumatic motor. Just as the name suggests, our oil free pneumatic motors do not require lubrication.
Standard pneumatic motors cannot be used in many clean environments because they expel a tiny amount of lubrication in their exhaust. Although the amount of oil they expel is so minimal that it is completely imperceptible, it is still not suitable for a clean room environment. Since our oil free motors require no lubrication, the exhaust air exiting the machine is as clean as the compressed air going into it.
Free Testing Service
Place your mind at ease about your important purchase. Take advantage of our free testing service to confirm that the manual hand held bottle capper you are interested in is perfectly suited for your caps and bottles.
